8000 LI Series Dual Chamber Industrial Furnace

Options

Program controllers, over-temperature safety systems, timers, recorders, quench tanks, alternate door arrangements, forced cooling systems, computer interface, special voltages, gloves, tongs and foil wrap.

 Product Information

Fiber Lined Dual Chamber Furnaces

Unique “Space Saver” design offers the convenience and economy of two independently controlled chambers in one packaged assembly. The upper chamber (Hardening) is designed with lightweight ceramic fiber insulation for energy saving low power input and maximum heating efficiency for operation to 2200°F. Upper chamber coil wound heating elements are fully supported on ceramic rods for rapid radiation with faster heat-up rates. This unique design provides easy element access and low-cost, individual replacement of wires. The lower chamber (Tempering) is complete with a stainless steel liner and fan to recirculate heat for uniform temperature.

Available at operating temperatures of 800°F to 1600°F. Ideal for Tool Rooms and Schools, providing a complete heat treat station in one furnace.

Ruggedly constructed and rated for work loads up to 40 lbs. per square foot of hearth area. All models are completely wired, assembled, test-fired, and shipped ready for connection to the main power supply. Compact design, fast installation, and simple, safe, dependable operation.

Standard Features

• Welded sheet metal single shell construction.
• Both chambers are designed with the same working dimensions.
• Heavy gauge coil wound low watt density heating elements for longer life.
• Multi-layered energy-efficient lightweight ceramic fiber insulation in the upper chamber and firebrick in the lower oven for maximum heat storage and minimum heat loss.
• Lower chamber elements are mounted in easy-to-replace holders on side walls.
• Hearth plate for load support and floor brick protection in the upper chamber.
• Horizontal swing doors on both chambers.
• Safety micro-switch shuts off power to elements and fan when the door opens.
• Eurotherm digital temperature controller with type K thermocouple and magnetic contactor on each chamber.
• Controls are mounted in a separate side-mounted NEMA 1 panel and operate on 115 volts.

Note: Quench tanks can be stored below units with chamber heights through 12”.