Series Blue Devil 8000 - Gas Fired Dual Chamber Furnaces
|
Dual Chamber gas fired furnaces for hardening, drawing, preheating, annealing, and normalizing applications. The upper chamber is available at operating temperatures of 2000°F(DL), or 2300°F(HL) and the lower chamber is rated for 1200°F or 1600°F.
Ruggedly constructed, providing fast heat up rates, and designed for easy operation with maximum safety. Manufactured to NFPA guidelines with failsafe features including pre-ignition air purge, supervised pilot, door shut off switch, and automatic furnace shut down for protection against loss of gas, electricity, blower or pilot flame. Simplicity of operation: turn on power, open gas cock, set temperature, and activate pilot ignition system. Available in six standard models.
Standard Features
- Welded angle iron frame construction with sheet steel and plate lining.
- Premix blower/mixer with burner, under hearth firing and low noise level operation.
- Automatic air purge of chamber prior to ignition.
- Multi-layered high temperature lightweight firebrick and mineral block insulation.
- Silicon carbide hearth plates for load support and thermal transfer from underfiring.
- Vertical lift door with hand crank on upper chamber and horizontal swing type door on lower chamber.
- Safety micro-switch shuts off main burner when door opens.
- Honeywell digital temperature controller with type K thermocouple.
- Independent flue exhaust on each chamber.
- Completely pre-piped including supervised pilot, pressure switches and explosion proof switch.
- Ready for connection to ½" IPS gas train and supply regulated to 6-8" water column.
- Controls mounted in separate side mounted NEMA 1 panel and operate on 115 volts.
