Integral Quench Furnaces are ideal for heat treatment of small parts under protective atmosphere for operation to 2100°F. The economical design of these units provides an inexpensive manual method of heating & quenching small parts without exposure to air. The workload is heated in the furnace chamber and pulled into the vestibule section where the parts drop through a manually operated flapper mechanism into a basket located in the quench tank. The quench basket is easily removed from the tank. The furnaces are complete with an alloy muffle which separates the atmosphere and workload from refractory and elements, and an inner door which separates the furnace chamber from the vestibule section. An outer door provides a positive seal against the vestibule. The IQ Models operate under a positive flow of protective atmosphere to minimize scale and oxidation on most tool steels. This design achieves lower dew points, reduces atmosphere consumption and shortens purge time.

Compact design, easy installation and simple, safe, dependable operation.  Available in 7 standard sizes. All models are completely wired, test fired and shipped ready for connection to main power and regulated atmosphere pressure of 5 PSI.  All models will operate with inert atmosphere. Flammable atmosphere may be used with the addition of Atmosphere Safety System per NFPA Code 86 C.  

• Welded sheet metal shell construction with structural reinforcement.
• Heavy gauge coil wound low watt density heating elements for longer life.
• High grade alloy muffle with inlet pipe and front flange.
• Manual vertical lift inner and outer door assemblies.
• Vestibule with flapper and chute.
• Quench tank constructed from continuously welded mild steel .
• Multi-layered energy efficient lightweight firebrick and mineral block insulation for maximum heat storage and minimum heat loss.
• Elements mounted in easy-to-replace holders located on side walls and below the hearth for uniform temperature.
• Silicon carbide hearth plate for full muffle support and thermal transfer from floor elements.
• Honeywell digital temperature controller with type K thermocouple and contactor.
• Controls are mounted in separate side mounted NEMA 1 panel and operate on 115 volts.

  ---